• Qualified for Automotive Applications
• AEC-Q100 Qualified with the Following Results:
 - Device Temperature Grade 1: -40°C to 125°C
  Ambient Operating Temperature Range
 - Device HBM ESD Classification Level 2
 - Device CDM ESD Classification Level C3
• Wide Input Range: 3.8V-40V
• Up to 3.5A Continuous Output Current
• 0.8V ±1% Feedback Reference Voltage
• Integrated 80mΩ High-Side 50mΩ Low-Side Power MOSFETs
• Pulse Skipping Mode (PSM) with 25uA Quiescent Current in Sleep Mode
• 100ns Minimum On-time
• Programmable Soft-start Time
• Adjustable Frequency 300KHz to 2.2MHz
• External Clock Synonization
• Frequency Spread Spectrum (FSS) Modulation for EMI Reduction
• Precision Enable Threshold for Programmable Input Voltage Under-voltage Lock Out Protection (UVLO) Threshold Hysteresis
• Low Dropout Mode Operation
• Derivable Inverting Voltage Regulator
• Over-voltage Over-Temperature Protection
• Available in an ESOP-8 Package


The SCT2432Q is 3.5A synonous buck converters with wide input voltage, ranging from 3.8V to 40V,which integrates an 80mΩ high-side MOSFET a 50mΩ low-side MOSFET. The SCT2432Q, adopting the peak current mode control, supports the Pulse Skipping Modulation (PSM) with typical 25uA low quiescent current which assists the converter on achieving high efficiency at light load or stby condition.The SCT2432Q features programmable the soft-start time together with the programmable switching frequency from 300 kHz to 2.2 MHz with an external resistor, which provides the flexibility to optimize either efficiency or external component size. The converter supports external clock synonization with a frequency b from 300kHz to 2.2MHz. The SCT2432Q allows power conversion from high input voltage to low output voltage with a minimum 100ns ontime of high-side MOSFET.The SCT2432Q is an Electromagnetic Interference (EMI) friendly buck converter with implementing optimized design for EMI reduction. The SCT2432Q features Frequency Spread Spectrum FSS with ±6% jittering span of the switching frequency modulation rate 1/512 of switching frequency to reduce the conducted EMI.The SCT2432Q offers cycle-by-cycle current limit hiccup over current protection, thermal shutdown protection, output over-voltage protection input voltage under-voltage protection. The device is available in an 8-pin thermally enhanced SOP-8 package.


• Automotive System
• Industrial Medical Distributed Power Supplies
• Optical Communication Networking System